Heirloom; Hemstitching (1) (Daisy Stitch); Hemstitching (2) (Drawn Work) - Brother Isodore„ Innov-ís 5000 Operation Manual

Computerized sewing and embroidery machine
Hide thumbs Also See for Isodore„ Innov-ís 5000:
Table of Contents

Advertisement

SEWING THE STITCHES

Heirloom

■ Hemstitching (1) (Daisy Stitch)

Use for sewing tablecloths, decorative hems, and
decorative stitching on shirt fronts.
Memo
Use a light to medium weight homespun fabric
with a little stiffness.
a
Insert a type 130/705H, size 100/16 Wing
needle.
• The "Automatic Threading" button cannot be
used. Thread the wing needle by hand, from
front to back. Using the "Automatic
Threading" button may result in damage to the
machine.
• A more attractive finish can be obtained if you
use a "130/705H Wing" needle when sewing
these patterns. If using a wing needle and the
stitch width has been set manually, check that
the needle will not touch the presser foot by
carefully rotating the handwheel before
starting sewing.
b
Select a stitch and attach presser foot "N".
*
Select any stitch between 3-01 and 3-25.
Memo
• For details on each stitch, refer to the
"STITCH SETTING CHART" at the end of
this manual.
78
CAUTION
c
Start sewing.
Example: Illustration of finished product

■ Hemstitching (2) (Drawn Work)

a
Pull out several threads from one area on a
piece of fabric to open the area.
*
Pull out 5 or 6 threads to leave a 3 mm
(approx. 1/8 inch) area open.
Memo
Loosely woven fabrics work best for this.
b
Select
.
Memo
For details on each stitch, refer to the
"STITCH SETTING CHART" at the end of this
manual.
c
Attach presser foot "N". With the right side
of the fabric facing up, sew one edge of the
open area.
N

Advertisement

Table of Contents
loading

This manual is also suitable for:

882-s96

Table of Contents