Save And Load; Exit - Sanyo PLC-XF60 Owner's Manual

Gamma Correction

■ Save and load

Save the data loaded from the projector or the adjusted data.
Each of video data and computer data can be set in the projector. When storing the
data, give a distinctive name.
Save and load according to the following procedure.
Save : Select "Save as (A)" in the "File (F)" menu. Give a name to the data and save
it.
Load : Select "Open (O)" in the "File (F)" menu and choose the file you want to load.
Adjustment data will be displayed on the adjustment screen. Press "Send
data" button then the adjusted data is sent to the projector and the data will
be projected on the screen.

■ Exit

Select "Exit" in the "File (F)" menu, then Gamma Correction menu will close.
24