Asus P5VDC-X Installation Manual page 44

8. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)
These connectors are for ATX power supply plugs. The plugs from
the power supply are designed to fit these connectors in only one
orientation. Find the proper orientation and push down firmly until the
connectors completely fit.
Top:Line In
Center:Line Out
Below:Mic In
P5VDC-X
P5VDC-X ATX Power Connectors
•
•
•
1-32
+12V DC
R
You can also use a Power Supply Unit (PSU) with a 24-pin ATX power
connector on this motherboard.
Do not forget to connect the 4-pin ATX +12 V power plug;
otherwise, the system will not boot up.
Use a PSU with a minimum power rating of 300 W on this
motherboard. We recommend that you use a PSU with a
higher power output when configuring a system with more
power-consuming devices. The system may become unstable or may
not boot up if the power is inadequate.
ATX12V
+12V DC
GND GND
Chapter 1: Hardware information
EATXPWR
+3 Volts +3 Volts
-12 Volts +3 Volts
Ground Ground
PSON# +5 Volts
Ground Ground
Ground +5 Volts
Ground Ground
-5 Volts Power O
+5 Volts +5V Standby
+5 Volts +12 V
+5 Volts +12 V
Ground +3 Volts
K
olts
olts