Table of Contents
Advertisement
Setting the F/T Ring Time (Fax/Tel mode only)
If you set the Receive Mode to Fax/Tel, you will need to decide how
long the MFC will signal you with its special pseudo/double-ring
when you have a voice call. (If it's a fax call, the MFC prints the fax.)
This pseudo/double-ring happens after the initial ringing from the
phone company. Only the MFC rings (for 20, 30, 40 or 70 seconds,
for 20, 30, 40 or 55 seconds for New Zealand) and no other phones
on the same line will ring with the special pseudo/double-ring.
However, you can still answer the call on any extension phone (in a
separate wall socket/phone socket) or on the same line as the MFC.
(See Operation from extension telephones on page 5-9.)
1
If it is not illuminated in green, press
2
Menu
Press
3
Press
long the MFC will ring to alert you
that you have a voice call.
Set
Press
.
4
Stop/Exit
Press
Even if the caller hangs up during the pseudo/double-ringing,
the MFC will continue to ring for the set time.
2
1
2
,
,
,
.
or
to select how
.
Fax
(
).
Setup Receive
2.F/T Ring Time
SETUP RECEIVE 5 - 4
Advertisement
Table of Contents
