Dell Latitude E5430 Owner's Manual page 61

Option
Drives
SMART Reporting
USB Controller
Keyboard Illumination
Miscellaneous Devices
Description
• ATA
• AHCI
• RAID On: This option is enabled by default.
Allows you to configure the SATA drives on board. All drives are enabled by
default. The options are:
• SATA-0
• SATA-1
• SATA-4
• SATA-5
This field controls whether hard drive errors for integrated drives are reported
during system startup. This technology is part of the SMART (Self Monitoring
Analysis and Reporting Technology) specification. This option is disabled by
default.
• Enable SMART Reporting
This field configures the integrated USB controller. If Boot Support is enabled, the
system is allowed to boot any type of USB Mass Storage Devices (HDD, memory
key, floppy).
If USB port is enabled, device attached to this port is enabled and available for OS.
If USB port is disabled, the OS cannot see any device attached to this port.
• Enable Boot Support
• Enable External USB Port
NOTE: USB keyboard and mouse always work in the BIOS setup irrespective of
these settings.
This field lets you choose the operating mode of the keyboard illumination feature.
The keyboard brightness level can be set from 25% to 100%
• Disabled: This option is enabled by default.
• Level is 25%
• Level is 50%
• Level is 75%
• Level is 100%
Allows you to enable or disable the following devices:
• Enable Internal Modem
• Enable Microphone
• Enable eSATA Ports
• Enable Hard Drive Free Fall Protection
• Enable Fixed Bay
• Enable Express card
• Enable Camera
61