Setting The Channel Tuning Mode - Toshiba 46RV525RZ Owner's Manual

Setting the Channel Tuning Mode
This feature allows you to choose how tuning will be
handled for analog and digital channels when the TV
is in Antenna mode.
Note: To use this feature, the Input Configuration
must be set to Antenna (1& page 29).
The channel tuning mode has three options.
Both analog and digital channels can
be tuned normally
,
.
" .' , Description
Standard
Mode'
To tune to a channel or input in Select mode:
1
~ ~
While watching TV, press
jg;) ....
or C§J
~ to open the
Channel Browser™ and surf back to a previous item
or forward to the next item in the list.
]n
Select
mode, when you stop on an item in the
Channel BrowserHt, it will be highlighted but you
must press
8
to tune the TV to the highlighted
item.
2
Press
8
to tune the TV to the highlighted item.
3
~IT
..
Press 0 to close the Channel Browser
lM .
To set the Channel Tuning Mode:
Note: Digital mode will be most useful after
analog channels are shut down by the
government in 2009.
1
From the
Setup
menu, highlight
Installation
and
press
8.
A new set of
Installation
menu icons
will appear.
2
Open the
Terrestrial
menu, highlight
Channel
Tuning Mode,
and then press
~
and . . . . to
select your desired mode.
Note:
• The Channel Add/Delete & Channels Block
windows as well as the Channel Browser ANT/
CABLE list will be updated automatically when
you change the mode. Also, the History List will
be cleared, but the Favorites List will be saved.
• Even if the Channel Tuning Mode is set to
Digital, analog channel 3 will still be the
default channel to prevent the initial case
where no digital channels have been found in
prior channel scans. (Channel Add/Delete will
not have anything listed until a scan is done.)
Digital channels will have priority when
manually entering a channel number
using the Channel Number (0-9) on the
remote control,
analo?c~~annels
can
still be tuned by
r£) /
® ,
if available
Only digital channels can be tuned
Auto
(default)
Digital
Clearing channels from the History List:
• Reconfiguring the
ANT/CABLE
input will clear the
History List.
Note: See page 29 for details on configuring
the antenna input.
• Once 32 channels or inputs are stored in the History
List, the oldest item will be removed from the list
when a new channel or input is tuned.
• Turning off the TV will clear the History List.
Note: Whenever an item is selected that cannot
be tuned (for various reasons), the TV will
automatically tune to the previously viewed
channel or input.
Adding channels and inputs to the History
List:
As a channel or input is tuned, the Channel Browser™
adds it to the History List and displays
it
on the "right
side" of the Channel Browser™. Previously tuned
channels/inputs are "shifted" to the left, eventually
BACK
moving otf the left side. Press
jg;) ....
to surf backward
through the previously tuned channels/inputs. Any
channel or input that is tuned repeatedly will not be
repeated in the History List, but instead is moved to
the end of the list on the right side of the Channel
Browser™.
The Channel BrowserTl\! will store the following
channels:
• All channels that are tuned using the numeric buttons
on the remote control.
• All channels that are tuned usi ng
r£)
or
~
on the
remote control.
Adding and clearing channels and inputs
in the History List
37
I