Adjusting The Volume And The Brightness Of The Display; Starting Up; Selecting Programs; Playing The Demo Songs - Yamaha MOX6 Owner's Manual

Setting Up
Adjusting the volume and
the brightness of the
display
Adjust the volume levels of this instrument and the connected
amplifier/speaker system.
NOTE
When connecting to a set of powered speakers or PA equipment,
set the MASTER VOLUME to about 70%, then raise the volume of
the powered speakers or PA equipment to the appropriate level.
If the display is not easily visible, press the [INC]/[DEC] button
while holding the [UTILITY] button to adjust for optimum
visibility.
Adjust the volume with the
MASTER VOLUME slider.
Max.
Min.
CAUTION
Do not listen with the headphones at high volume for long periods of
time. Doing so may cause hearing loss.

Starting up

Try playing some of the realistic and dynamic MOX6/MOX8
sounds from the keyboard now. When you turn the power on,
the display below appears.
Program name
Mode Bank
NOTE
In the default settings, the Master mode is selected. See page 22
for details about the modes.
NOTE
Keep in mind that the example displays shown in this manual are
for instruction purposes only, and may appear somewhat
different from those on your instrument.
In this condition you can play the keyboard and hear the
sounds of the selected program. In the default setting, the
Master mode provides a total of 128 programs each of which
includes the mode (Voice, Performance, Song, Pattern) and
its program number. The top of the Master Play display
indicates the Master program number and the status (Mode,
18
MOX6/MOX8 Owner's Manual
Adjust the display contrast.
MOX6/MOX8
Master program number
Program number
Bank, Program number and its name) registered to the
current Master program.
NOTE
For details about Banks, see pages 24 and 32.

Selecting programs

In the default setting, the Master mode provides a total of 128
programs each of which includes the mode (Voice,
Performance, Song and Pattern) and its program number.
Try out the different Master programs to play various Voices
and Performances. You can change the Master program
number by using the [INC] button, [DEC] button, or [DATA]
dial.
Decreases number
Decreases
number

Playing the Demo Songs

The MOX6/MOX8 features a variety of Demo Songs,
showcasing its dynamic sound and sophisticated functions.
Here's how to play them back.
1
Press the [SONG] button to enter the Song Play
mode.
The PLAY display appears.
2
Press the SEQ TRANSPORT [F] (Play) button to
start the Demo Song.
The Song currently shown on the display starts.
Stop button
NOTE
To adjust the volume level of the Demo Songs, use the
[MASTER VOLUME] slider.
3
Press the SEQ TRANSPORT [J] (Stop) button to
stop the Demo Song.
4
Select another Demo Song by using the [INC] button
or [DATA] dial.
5
Play the selected Demo Song by performing Steps
2 and 3.
Increases number
Increases
number
Play button