Yamaha mLAN Installation Manual page 8

mLAN Driver initial settings
After you restart the computer, complete the mLAN Driver
initial settings.
21
A dialog box in the upper left corner of the
screen prompts you to turn on the power to
the device. Connect the mLAN device to the
computer, then turn on the power to the
device.
The "Found New Hardware Wizard" window is dis-
played.
NOTE
• A dialog box may appear asking you whether you wish to
connect to Windows Update. In this case, select the radio
button to the left of "Not at this time," then click [Next].
22
Select the radio button next to "Install the
software automatically [Recommended],"
then click [Next].
23
When the installation is complete, a message
indicating that installation is complete
appears. Click [Finish], then click [OK] in the
same dialog box (that prompted you to turn on
the power to the device) indicated in Step 21.
24
The following message appears in the upper
left corner of the screen: "The driver initializa-
tion will be executed." Click [OK].
NOTE
• During Steps 25 and
appears indicating that you are now making the initial set-
tings for each driver. This window also indicates the num-
ber of times the "Found New Hardware Wizard" will be
displayed during the procedure. Unless you wish to cancel
installation, do not close this window.
Example
26 , and Steps 28 and 29 , a window
Bus driver initial settings
25
The "Found New Hardware Wizard" window
appears. Select the radio button next to
"Install the software automatically [Recom-
mended]," then click [Next].
NOTE
• A dialog box may appear asking you whether you wish to
connect to Windows Update. In this case, select the radio
button to the left of "Not at this time," then click [Next].
26
When the installation is complete, a message
indicating that installation is complete
appears.
Click [Finish].
27
Repeat Steps 25
(indicating that you are making the initial
bus driver settings) closes.
Audio/MIDI driver settings
28
The "Found New Hardware Wizard" appears.
Select the radio button next to "Install the soft-
ware automatically [Recommended]," then
click [Next].
NOTE
• A dialog box may appear asking you whether you wish to
connect to Windows Update. In this case, select the radio
button to the left of "Not at this time," then click [Next].
mLAN Driver/mLAN Tools Installation Guide
and 26 until the window
8