Advertisement
This window lets you set the parameters common to all the displays.
Determines the connection method between the iPad
and MIDI instrument.
cable: Should be selected when connected via the
i-MX1.
wireless: Should be selected when connected via
wireless Network MIDI.
NOTE
When set to "wireless," make the Wi-Fi setup in Settings > Wi-Fi in
your iPad.
Determines the Fader behavior.
jump: The Fader jumps to any tapped location in the
Fader area.
catch: The Fader will be "caught" as you drag on it.
When set to on, tapping [RECEIVE] calls up a
confirmation message.
*What is a Template?
Each of the Templates includes the settings of all the
displays, meaning that you can call up all the Effect
settings just by selecting the desired Template. Each
of the Templates can be renamed, called up and
initialized.
Multi Editor Essential Owner's Manual
Title bar and Utility window
Title bar
Utility window
Each lamp flashes according to the MIDI in/out
messages.
Tapping this opens or closes the Utility window.
Set this to the same number as that of the instrument.
Selects the MIDI port of the instrument in case of
wireless connection.
Selects the connected instrument.
Determines the knob behavior.
rotary: Dragging around the knob will rotate it in the
same direction.
linear: Dragging vertically upward from the knob
rotates the knob clockwise, and dragging downward
rotates counter-clockwise.
When set to on, selecting a Template* transmits the
corresponding settings via MIDI.
Tapping this calls up the Owner's Manual.
Tapping here initializes all the settings.
Indicates the program version.
2
Advertisement
