UTILITY Setting Area
This section describes the UTILITY setting area, which can be accessed using the [UTILITY] button. In this area, you
can set parameters affecting the entire instrument and perform a range of file management operations.
CAUTION
• Be sure to store any settings that you have edited before turning off the instrument. (See page 45.)
Makeup of UTILITY Setting Area
The UTILITY setting area is subdivided into three different sections (UTIL1 to UTIL3). Use the [ B ]/[ C ] buttons to navigate between
these sections. If a section contains parameter-setting pages, the [ENTER] button will light up. Press the [ENTER] button to access these
pages. In certain cases, a number of additional pages may be accessed from a parameter setting page, also using the lit [ENTER] button.
Furthermore, you can press the [EXIT] button to move back towards the top of the setting area.
Sections
UTIL1
≥≥≥≥GENERAL
UTIL2
≥≥≥≥≥CLICK
UTIL3
≥≥≥MASTER≥EQ
UTIL4
≥≥≥≥≥≥PAD
UTIL5
≥≥≥≥≥HI-HAT
UTIL6
≥≥≥≥≥≥MIDI
UTIL7
≥≥≥≥≥≥FILE
UTIL8
≥≥FACTORY≥SET
82
Owner's Manual
(UTIL)
Parameter-setting pages
UTIL1-7 Pan Depth page ................................................................................ Page 84
UTIL3-2 EQ Shape page................................................................................. Page 87
UTIL6-6 MIDI Sync page................................................................................. Page 91
UTIL6-7 Clock Out page ................................................................................. Page 91
UTIL7-1 Save File page .................................................................................. Page 93
UTIL7-2 Load File page .................................................................................. Page 94
UTIL7-5 Format page...................................................................................... Page 97
Instrument Reset............................................................................................. Page 98