Scanning And Connecting To A Wi-Fi Network; Adding A Wi-Fi Network Manually - Samsung SCH-R940 User Manual

Scanning and Connecting to a Wi-Fi Network

When you turn on Wi-Fi, your phone searches for available
Wi-Fi network access points (hotspots), then displays them in
a pop-up list.
1. From the Notifications bar, sweep your finger
downward to display the Notification Panel.
2. Touch Wi-Fi to turn Wi-Fi On.
3. When your phone completes a scan, a list of detected
hotspots appears in the display.
4. Touch a Wi-Fi hotspot to connect.
• If the Wi-Fi hotspot is open, you will be automatically
connected. (Open hotspots can require to you launch
metroWEB and agree to a set of network usage rules that
appear in the metroWEB window.)
• If the Wi-Fi network is secured, enter a password at the prompt
to connect.

Adding a Wi-Fi Network Manually

1. Press Home
Wireless & networks
2. Touch Wi-Fi to turn Wi-Fi On.
3. Under Network Settings, touch Add Wi-Fi Network, then
enter these fields:
• Network SSID: Enter the name of the Wi-Fi Wireless Access
Point.
• Security: Select the type of security used by the WAP.
• Key (Passphrase): If the WAP is secured, enter the password
or alpha-numeric key.
Menu, then touch Settings
Wi-Fi settings.
Connections 97