Adjusting With The Remote Control - NEC NP-PX700W User Manual

Adjusting with the remote control

1. Press the LENS SHIFT button.
The Lens Shift screen will be displayed.
2. Press the ▼▲◀ or ▶ button.
Use the ▼▲◀▶ buttons to move the projected image.
TIP:
• The diagram below shows the lens shift adjustment range for the desktop front. To raise the projection position higher than this,
use the tilt feet. (→ page 25)
• For the ceiling mount/front projection lens shift adjustment range, see page 214.
2. Projecting an Image (Basic Operation)
Width of projected image
0.5V
1V
1H
0.1H
0.1H
1H
1V
0.5V
Width of projected image
23
Height of projected image
0.1H
0.1H
Height of projected image