Installing The Av/C Camera Storage Subunit-Wia Driver - Canon 9540A003 - Optura 400 Camcorder Instruction Manual

4
Restart the computer.
5
Check if the driver has been installed correctly.
From the [start] menu, select [My
Computer] and check if the [Canon
USB Video] icon appears. If the icon
does not appear, the installation has
not been completed properly. Uninstall
( 71) and reinstall the driver.

Installing the AV/C Camera Storage Subunit-WIA Driver

If you have installed the AV/C Camera Storage Subunit-WIA driver contained
on the DV NETWORK SOLUTION DISK Version 1, make sure to install the
driver provided with the DV Network Software when installing DV Messenger
Version 2 (you do not need to uninstall the prior driver for this procedure).
Before installing the driver following the procedure below, install the DV
Network Software first to copy the driver files to the computer.
Close all programs that are running before installing the driver.
Do not turn off the camcorder until the driver installation is complete. And do
not interrupt the installation.
Users of Windows XP Professional must first log in as an Administrator to
install programs.
1
Connect the power adapter to the camcorder.
2
Set the camcorder to NETWORK or CARD PLAY mode.
(Camcorder without NETWORK mode: Set the camcorder to
CARD PLAY mode.)
3
Connect the camcorder to the computer using the DV cable
( 23).
• The driver installation starts automatically.
• Depending on the setting of your computer, a video editing program may start.
In such case, close this program.
• If the installation is complete, the Scanner and Camera Wizard or a dialog for
selecting an application appears. Click [Cancel] to close the dialog.
4
Restart the computer.
20 Installing the Software