Asus M2N68 AM - Motherboard - Micro ATX User Manual page 33

4. CPU fan connector (4-pin CPU_FAN)
The CPU fan connector supports cooling fans of 350mA~740mA (8.88W max.) or a
total of 1A~2.22A (26.64W max.) at +12V. Connect the CPU fan cable to the CPU fan
connector on the motherboard, ensuring that the black wire of the cable matches the
ground pin of the connector.
DO NOT forget to connect the CPU fan cable to the CPU fan connector. Insufficient air flow
inside the system may damage the motherboard components. This is not a jumper! DO
NOT place a jumper cap on the CPU fan connector.
Only the CPU fan supports Q-Fan.
M2N68-AM
M2N68-AM CPU fan connector
5. Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect
the S/PDIF module cable to this connector, then install the module to a slot opening at
the back of the system chassis.
M2N68-AM
M2N68-AM Digital audio connector
The S/PDIF module is purchased separately.
Chapter 1: Product introduction
CPU_FAN
SPDIF_OUT
1-23