NEC P401 - MultiSync - 40" LCD Flat Panel Display Installation Manual

P401 Installation Guide
40" LCD Display
Product Description and Notes
Tilt Angle and Rotation
Ventilation Requirements
Display Dimensions
Front, Top & Right Side
Rear & Bottom
Display Dimensions w/Optional Speakers and Stand
Optional Table Top Stand Dimensions
Optional Speaker Dimensions
Dimensions with Optional Wall Mount
Dimensions with Optional Wall Mount (WMK-3260L)
Dimensions with Optional Wall Mount (WMK-3257)
Input Panels
Control Codes
Type:
Resolution:
Aspect Ratio:
FCC:
Power Consumption:
BTU's:
NOTES:
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
•
intended to be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
•
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally
•
to fill the screen using the menus (see "Aspect Modes" in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
•
Below are the maximum angles that the monitor can be tilted in the landscape position only.
Landscape 20deg
Max. 20 deg
www.necdisplay.com
LCD Display
1920 x 1080
16:9
Class B
175W (typ)
597.13 BTU/hour
NEC Display Solutions of America, Inc.
Page 1
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 8
Page 9
Page 10
Page 11
Screen Surface:
Dimensions without stand: 36.2"(W) x 21.0"(H) x 5.5"(D)
Dimensions with stand:
Weight without stand:
Weight with stand:
Rev 1.3
Anti-Reflective
36.2"(W) x 22.4"(H) x 13.0" (D)
55.8 lbs / 25.2 kg
52.9 lbs / 24.0 kg
P401 Page 1 of 11