D-Link Unified Access System User Manual
Viewing the Client Summary
Use the Client Summary page to view summary information about all authenticated wireless
clients that are connected through the captive portal. From this page, you can manually force
the captive portal to disconnect one or more authenticated clients. The list of wireless clients is
sorted by client MAC address.
To view information about the wireless clients connected to the D-Link Unified Access
System through the captive portal, click Security > Captive Portal > Client Connection
Status.
Figure 85. Client Summary
Table 68
Table 67. Client Summary
Field
Client MAC
Address
Client IP Address
User
Protocol
Verification
To force the captive portal to disconnect an authenticated client, select the check box next to
the client MAC address and click Delete. To disconnect all clients from all captive portals,
click Delete All.
Click the MAC address of a client to view additional status information.
182
© 2001- 2008 D-Link Corporation. All Rights Reserved.
describes the fields on the Client Summary page.
Description
Identifies the MAC address of the wireless client (if applicable).
Identifies the IP address of the wireless client (if applicable).
Displays the user name (or Guest ID) of the connected client.
Shows the current connection protocol, which is either HTTP or HTTPS.
Shows the current account type, which is Guest, Local, or RADIUS.