Table of Contents
Advertisement
Section 4 - Wireless Security
802.1x is for advanced users who are familiar with using a RADIUS server and setting up certificates.
1. Open the Wireless Utility by double-clicking on the D-Link icon in your system tray
(lower-right corner of screen). Click on New to create a new profile or highlight an
existing profile and click Modify.
2. Select 802.1x under Set Security Option.
3. Click on Advanced Config to continue.
4. Next to EAP Type, select EAP-TLS, LEAP, EAP-TTLS, or PEAP. Extensible
Authentication Protocols allow devices on the network to request
authentication from the RADIUS server in the network. All the devices on
the network must use the same EAP type when using a RADIUS server for
authentication. Some RADIUS servers require that the Validate Server field
be selected. Check this field if your RADIUS server requires validation.
5. Select an User Certificate from the drop-down menu.
6. Enter the login information required to authenticate.
7. Click Add to enter the IP address(es) of your RADIUS servers.
8. Click OK to save your settings.
D-Link DWA-620 User Manual
Configure 802.1x
Using the D-Link Utility
45
Advertisement
Table of Contents
