Setting Up Oms - Yamaha TOOLS for TYROS Installation Manual

6
The installation starts. If the driver has already been installed,
the following message appears. To return to step #3, press
[Continue]. To complete the installation, click [Quit].
7
When the installation is complete, the system displays the
following message: "Installation was successful. You have
installed software which requires you to restart your com-
puter." Click [Restart]. The computer automatically restarts.
You can locate the installed files in the following locations:
• [System Folder] → [Control Panels] → [YAMAHA USB
MIDI Patch]
• [System Folder] → [Extensions] → [USB YAMAHA
MIDI Driver]
• [System Folder] → [OMS Folder] → [YAMAHA USB
MIDI OMS Driver]
I File Utility
Once you've installed the File Utility, you can use your computer
to access and organize data saved to the User/FD/HD drive in the
TYROS.
1
Double-click on the "FileUtil_" folder in the CD-ROM.
"Install File Utility" file will be displayed.
2
Double-click on the "Install File Utility" file.
The File Utility installation dialog will be displayed. Execute
the installation by following the on-screen directions.
3
After installing, restart the computer.
For details, refer to the on-line Help or the PDF owner's manual.

Setting up OMS

The OMS studio setup file for the TYROS is contained in the
included CD-ROM. This studio setup file is used for setting up
OMS.
• Before performing the following procedure, the OMS and USB MIDI Driver
should be installed (see page 8).
1
Use a USB cable to connect the USB terminal of the com-
puter (or the USB hub) to the USB terminal of the TYROS
and turn the TYROS' power on.
2
Start the computer.
3
Insert the included CD-ROM into the CD-ROM drive of your
Macintosh computer.
The CD-ROM icon appears on the desktop.
4
Double-click on the CD-ROM icon, "OMS_", and "OMS
Setup for YAMAHA."
The file "TYROS-USB" appears. Copy this to the hard disk
on your computer.
5
Double-click on the "TYROS-USB" file to start the OMS
Setup.
6
After starting the OMS Setup, the Studio setup file double-
clicked in step #5 opens.
Indicates this setup is available
• If " " is not indicated at the right of the setup file name, select
"Make Current" from the "File" menu and execute the save opera-
tion.
The OMS studio setup has been completed.
• After the OMS studio setup above has been completed, your computer will
recognize only the TYROS as a MIDI instrument. If you use another MIDI
instrument in addition to the TYROS or you add a second TYROS to the
existing system, you should create an original Studio Setup file. For details,
refer to the on-line manual supplied with the OMS.
TOOLS for TYROS INSTALLATION GUIDE
For Macintosh Users
9