Table of Contents
Related Manuals for Samsung VC-8916VN
Summary of Contents for Samsung VC-8916VN
- Page 12 MK-10 MK-11...
-
Page 13: Vacuum Cleaner
Operating Instructions VACUUM CLEANER Before operating this unit, please read the instructions carefully. -
Page 14: Identifications Of Parts
IDENTIFICATIONS OF PARTS FEATURES Features include indicator and automatic cord rewind. NOTE : Not all models have the same features. HOSE * REMOTE POWER CONTROL * IMPORTANT SAFEGUARDS (REMOTE CONTROL TYPE ONLY) 1. Read all instructions carefully. Before switching on, make sure that the voltage of your electricity sup- HANDLE * ply is the same as that indicated on the rating plate on the bottom of the cleaner. -
Page 15: Power Cord
ASSEMBLING THE VACUUM-CLEANER READY FOR USE POWER CORD 1) PULLING OUT : The power cord is long enough to 1) Connect the suction hose to the suction tube. 2) Adjust the suction tube(depending on model). drawn out for convenience. EXTENDING : Holding the narrow part of the telescopic tube with one 2) REWINDING : When you have finished cleaning,discon- hand, push the handle in the... -
Page 16: Using The Accessories
AUTO MODE (BUTTON CONTROL TYPE ONLY) USING THE ACCESSORIES Open the tool storage cover upwards. If you press AUTO MODE, the power is automatically set at 1200~1300 watt. This mode reduces the suction power fluctuation which is caused by the fluctuation of airflow quantity to the motor. For example, when dust bag is full, the quantity of air to the motor will be decreased and power will be down followingly. -
Page 17: Replacing The Dustbag
CYCLONIC FILTER (ONLY CYCLONIC FILTER TYPES) REPLACING THE DUST BAG 1) To open the dust cover of the dust bag com- You can use a dust bag in your cleaner for a long time thanks to the Cyclonic Filter system and it 2) Remove the dust bag from the cleaner partment, press the clamper upwards(the clam- maintain the maximum cleaning efficiency. - Page 18 USAGE OF FLOOR NOZZLE MAINTENANCE OR REPLACEMENT OF THE FILTERS FOR RUG / FLOOR SELECTOR INLET FILTER Before use make sure that the position of the selector is in the right position for the type of surface to be cleaned. The secondary filter, located behind the grille in the back of dust bag compartment, protects the motor from dirt particles.
-
Page 19: Troubleshooting
TROUBLE SHOOTING PROBLEM CAUSE REMEDY Motor does not start. No power supply. Check cable, plug and socket. Suction force is gradually Filter, nozzle, suction hose Remove the object. decreasing. or tube is blocked. Cord does not rewind fully. Check that the cord is not Pull the cord out 2~3m &...