Advertisement
Playing a Sequence Frame by Frame
You can:
Stop the cassette at a given frame (image)
Advance one frame at a time
No sound is heard when playing back frame by
frame.
1
Press:
❿ to start playing the cassette
IIP/S to stop the tape at a given frame
IIP/S to advance frame by frame
To return to normal playback, press ❿.
2
Vertical stability: When playing back frame by
frame, interference may be seen on the screen.
Press the TRK (
or
) buttons to minimize this
effect.
Using the Tape Counter
The tape counter:
Indicates the elapsed time in the play and record
modes
Is reset when a cassette is inserted in the VCR
Allows you to find the beginning of a sequence easily
If the remaining time is to be calculated correctly,
you must indicate the type of cassette being used.
1
Insert a cassette in your VCR.
2
Press DISPLAY.
The tape counter does not necessarily start from
zero at the beginning of the tape.
3
To set the tape counter to zero at the beginning of a
sequence:
Press DISPLAY twice to display the counter
Press CNT.RESET when you want to set the tape
counter to zero
4
When you are ready,
Start playback or Recording.
Press the
button.
To fast-froward or rewind to the sequence at which
the counter was set to zero, press ➛ ➛ or ❿ ❿.
Result: The VCR stops automatically when the counter
reaches zero.
Some VCR information, such as the counter, can
be displayed on the television screen.
Press DISPLAY:
Once to display the current function and counter
Twice to display the counter only
Three times to display the time remaining on the
cassette
Four times to clear the display
Recording From TV
ANTENNA IN
AUDIO OUT
VIDEO OUT
VIDEO
TV
RF OUT
VIDEO IN
Recording from Another VCR
ANTENNA IN
VIDEO
AUDIO
LINE IN 1
TV
RF OUT
LINE OUT
VIDEO IN
AUDIO IN
1
Turn on the TV.
2
Connect the playback side VCR's A/V cable to the recording side VCR's video and audio in (rear panel).
3
Begin playback on the playback side VCR and hold down REC ( ) button.
4
Press the STOP ( ) button to end line recording.
You can copy a cassette to your VCR from another video source, such as another VCR.
It is an infringement of copyright laws to copy prerecorded cassettes or to re-record them in any
form without the permission of the owners of the corresponding copyright.
Video cassettes have a safety tab to prevent accidental erasure. When this tab has been
removed, you cannot record on the tape.
If you wish to protect a cassette, break off the tab using a small screwdriver.
To re-record over a protected cassette (safety tab broken), cover the hole with adhesive tape.
Playing a Cassette in Slow Motion
You can play a cassette in slow motion.
No sound is heard when playing back a cassette in
slow motion.
1
Press:
❿ to start playing the cassette
) as many times as required to
SLOW (
or
decrease or increase the speed respectively
❿ to return to the normal speed
2
When playing back in slow motion, picture interference
may occur. Press the TRK (
or
minimize this effect.
When you have been using the Slow Motion
function for more than about two minutes, the VCR
will automatically play to protect the:
Cassette
Video heads
Selecting the Cassette Type
If you wish to use the tape counter to display the time
remaining on a cassette, you must indicate the type of
cassette inserted.
1
Press MENU on the remote control.
Result: The menu is displayed.
Press the corresponding ➛ or ❿ buttons to select the
2
USER SET
option.
3
Press the
❷
button to select this option.
4
Press the corresponding
œ
or
❷
buttons, until the
TAPE SELECT
option is selected.
Press the ➛ or ❿ buttons as many times as required,
5
until the correct cassette length is displayed.
E180
E240
E 300
E260
6
Press MENU twice to exit the menu.
1
Turn on the TV. Tune your TV channel.
2
Connect your VCR to the TV by A/V cable
as above figure.
3
Hold down the REC ( ) button to start line
recording.
4
Press the STOP ( ) button to end line
recording.
AUDIO
Line recording is not available for
LINE IN 1
LINE OUT
the TV which has no A/V
OUTPUT JACK.
AUDIO IN
VCR
V IDEO OUT
L
H
OUT TO TV
ON
ATT
OFF
AUDIO OUT
ON
TEST
OFF
IN FROM ANT.
VIDEO OUT
AUDIO OUT
Auto Power Off
The Auto Power Off feature automatically turns off your
VCR if no signal is received and you do not press any
button for the selected time.
1
Press MENU on the remote control.
Result: The menu is displayed.
Press the corresponding ➛ or ❿ buttons to select the
2
EASY OPERATION
3
❷
Press the
button to select this option.
Result: The
EASY OPERATION
4
Press the corresponding
) buttons to
AUTO POWER OFF
Press the ❿ button, until you select the time of Auto
5
Power off interval.
OFF
6
On completion, press MENU twice to exit the menu.
Interval Repeat Play
You can set interval repeat play to repeat the cassette
several times for special interval.
1
Press MENU on the remote control.
Result: The menu is displayed.
Press the corresponding ➛ or ❿ buttons to select the
2
EASY OPERATION
3
Press the
❷
button to select this option.
Result: The
EASY OPERATION
4
Press the corresponding
NO. OF INTERVAL REPEAT
5
To...
Interval repeat play
Cancel interval
repeat play
6
On completion, press MENU twice to exit the menu.
7
To select interval during playback, press the REPEAT
button at the desired start point.
Result: "INTERVAL REPEAT SETTING" is displayed.
Press the REPEAT button one more time at the desired
end point.
Result: The tape is automatically rewound to the start
point. "INTERVAL REPEAT" is displayed.
Technical Specifications
Design and specifications are subject to change without notice.
Format
Heads
Television system
Luminance
Colour system
Tape speed
Recording/playback time
REW time
VIDEO
Input
Output
AUDIO
Input
Output
Frequency response
Power requirement
Power consumption
Operation temperature
Operation humidity
Weight
Dimensions (WxHxD)
Auto Repeat Play
You can set repeat play to repeat the tape continuously
from beginning to end.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
Press the corresponding ➛ or ❿ buttons to select the
2
EASY OPERATION
option.
3
Press the
Result: The
menu is displayed.
4
Press the corresponding
œ
or
❷
buttons, until the
REPEAT PLAY
option is selected.
5
To...
Repeat play
Do not wish to
2HOUR
3HOUR
repeat play
6
On completion, press MENU twice to exit the menu.
Displaying/Hiding On-Screen
Information
Your VCR displays most information both on the VCR
and the television.
You can choose to display or hide this information on the
television screen.
1
Press MENU on the remote control.
option.
Result: The programming menu is displayed.
Press the corresponding ➛ or ❿ buttons to select the
2
menu is displayed.
USER SET
or
buttons, until the
œ
❷
3
Press the
option is selected.
Result: The USER SET menu is displayed.
Press ❿, until...
4
Press the corresponding
5, 10, 15, off is displayed.
OSD
option is selected.
(choose repeat time 5 times,
5
10 times, 15 times)
To...
OFF is displayed.
Display on-screen
information
Hide on-screen
information
6
On completion, press MENU twice to exit the menu.
VHS PAL/SECAM standard
Video: 2 rotary heads / Audio/Control: 1 stationary head
Erase: 1 full track erase head
STANDARD G, K
FM azimuth recording
PAL/MESECAM/NT4.43: Down converted subcarrier phase
shifted direct recording
SECAM: 1/4 counted down subcarrier direct recording
NTSC PB on PAL TV
(PAL/MESECAM/SECAM)
23.39 mm/sec
3 hours (E-180 Tape)
About 60 sec in REW with E-180
0.5 to 2.0 Vp-p; 75 ohm unbalanced
1.0 ± 0.2 Vp-p; 75 ohm unbalanced
-8 dBm, 47 Kohm unbalanced
-8 ± 3 dBm, 1 Kohm unbalanced
100Hz - 8KHz
110-240V~, 50/60 Hz
Approx. 10 watts
41°F-104°F (5°C-40°C)
10%-75%
2.8 Kg (net)
360 x 94 x 240 mm
option.
❷
button to select this option.
EASY OPERATION
menu is displayed.
œ
or
❷
buttons, until the
option is selected.
Press ➛ or ❿, until...
ON is displayed.
OFF is displayed.
option.
❷
button to select this option.
œ
or
❷
buttons, until the
Press ➛ or ❿, until...
ON is displayed.
OFF is displayed.
(NTSC)
33.35 mm/sec
Advertisement
