Switching On and Off
English-12
The mains lead is attached to the rear of your set.
1
Plug the mains lead into an appropriate socket.
Result:
The standby indicator lights up on the front panel.
The main voltage is indicated on the rear of your set and the
frequency is 50 or 60Hz.
2
Press the POWER
Result:
The programme that you were watching last is reselected
automatically.
3
Press the numeric button (0~9) or channel up/down (
on the remote control or
the panel.
When you switch the set on for the very first time, you will be
asked to choose language in which the menus are to be
displayed (see page 16).
4
To switch your set off, press the POWER
button on the front of the panel.
button on the lower-right of
button again.
/
) button