Connecting External Components; Connecting An External Digital Component - Samsung HT-DS460 Instruction Manual

Connecting External Components

Connecting an External Digital Component

Example: Digital signal components such as a Set-Top Box or CD Recorder.
IMPEDANCE SUBWOOFER : 4
FRONT / CENTER / REAR : 4
CENTER REAR FRONT
L L
SUBWOOFER REAR FRONT
R R
Optical Cable
(not included)
1
Connect the Digital Input (OPTICAL) to the Digital Output on the external
digital component.
2
Press AUX on the remote control to select 'DIGITAL IN'.
•
Each time the button is pressed, the selection changes as follows: DIGITAL IN
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD DIGITAL IN
15
DIGITAL OUT
AUX 1 AUX 2.
AUX1 AUX2 FM AM.
Connecting an External Analog Component
Example: Analog signal components such as a VCR or TV.
IMPEDANCE SUBWOOFER : 4
FRONT / CENTER / REAR : 4
CENTER REAR FRONT
L L
SUBWOOFER REAR FRONT
R R
Audio Cable
If the external analog
component has only one
Audio Out, connect either
left or right.
1
Connect Audio In on the DVD player to Audio Out on the external analog component.
•
Be sure to match connector colors.
2
Press AUX on the remote control to select AUX 1 or AUX 2.
•
Each time the button is pressed, the selection changes as follows: DIGITAL IN
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD DIGITAL IN
AUX 1 AUX 2.
AUX1 AUX2 FM AM.
16