Key Functions; S Ide 1 K Ey; S Ide 2 K Ey - Kenwood TK-2200L Instruction Manual

S 1 k
ide ey
The default function of the Side 1 key is Super Lock.
Super Lock is designed to prevent accidental function changes
on your transceiver, during operation.
Press and hold the Side 1 key for 4 seconds to lock the
transceiver keys. The following keys/ functions can still be
used when Super Lock is active: Calling Alert, Monitor, Monitor
Momentary, PTT, Squelch Off, Squelch Off Momentary, and
Volume.
To deactivate Super Lock, with the transceiver power OFF,
press and hold the Side 2 key for 2 seconds while turning the
transceiver power ON.
When the LED lights orange, release the Side 2 key. A confirmation
•
tone will sound.
S 2 k
ide ey
TK-2200L/ TK-3200L (K, K2) Models:
The default function of the Side 2 key is Scan + Temporary
Delete.
You can scan the channels of the transceiver to search for a
signal. When the transceiver verifies a signal on a channel, it
proceeds to check whether or not its QT/DQT setting which is
set up on your transceiver matches (if any).
If the QT/DQT matches, the transceiver stops at the channel and
opens the squelch so you can listen to the call. If the QT/DQT
does not match, the call is ignored and scanning continues.
Note: You can only use Scan if there are at least 2 channels
available on your transceiver that are not locked out of Scan.

KEY FUNCTIONS

7