Recording (Tape B Only) - Kenwood XD-V555 Instruction Manual

RECORDING
(TAPE B only)
•
When recording important selections, be sure to make a preliminary test to ensure that the desired
material is being properly recorded.
•
The volume and sound quality can be adjusted with no effect on the recorded signals (Variable Sound
Monitor).
•
Metal and CrO tapes should not be used for recording or dubbing.
2
•
After make sure that the audio mode is set to "STEREO" , you can start recording.
Selection of reverse mode :
Press the REVERSE MODE button repeatedly to select the following setting :
•
" " ..... Recording stops after having recorded both sides of tape.
•
" " ..... Recording stops after having recorded one side of tape.
1
2
5
7 STOP
40 EN
Recording from the built-in CD player
(CD Synchronised Recording System)
1
2
•
3
4
•
5
4
•
•
To stop recording
Press the 7 STOP (7/RETURN) button.
3
The CD and tape will stop.
Auto restart function :
When recording continuously on both sides of the
tape :
Even if the last track of side A is not finished re-
cording, side B will automatically start recording
from the beginning of that track. The recording will
be made without cutting the beginning of the track
on side B.
Press the ON/STANDBY button to turn the
power on.
Press the CD button and load the desired disc.
Use the program playback function to store the
tracks you want to record in memory. (see page
18)
Load a cassette into the TAPE B cassette com-
partment.
Press the REC PAUSE button.
"SYNC. " and "¶ 2 3" will flash.
Press the 2 button to record on side A or 3 (3/
SELECT) button to record on side B.
"SYNC. " will disappear and "¶ 2 or ¶ 3" will
light up on the display.
CD playback will start approximately 5 seconds
after the tape starts.