Setting The Timer Program (Prog. Timer) - Kenwood R-K701 Instruction Manual

Timer operation
Setting the timer program
In each of PROG. 1 and PROG. 2, the timer data including the operating period and played contents can be
programmed and set to be activated or deactivated.
Adjust the clock before setting the timer $
Connect the related equipment under reference to "System connections" 6~8
1
Make preparations for timer.
Listening to CD
Set a disc.
(Only normal playback is possible.)
÷ The programs of "PROG.1" and "PROG.2" can be set at the same time.
÷ For the simultaneous programs setting, keep the time intervals of 1 minute or more between timer programs, in order
to avoid time overlapping.
2
Set the timer setting program number.
1
Press the MODE key and select "TIMER
SET" by pressing the 4/¢ key, and press
the ENTER key.
MODE
2
Select "PROG.1 SET" or "PROG.2 SET" by
pressing the 4 / ¢ key.
3
Press the ENTER key.
ENTER
38
EN
(PROG. TIMER)
Listening to radio
Radio stations should be preset
beforehand. ∞
ENTER
Each press of the 4 / ¢ key switches the display
items;
÷ The previously set contents are displayed. (If you do
not want to change them, simply press the ENTER
key.)
÷ When a timer setting has already been made in the
selected timer, the setting will be overwritten by the
new setting.
Listening to external input sources
Set the timer for a component
connected to external input jacks.
"PROG.1 SET"
"PROG.2 SET"
CD 1
1 2 3 4 5
L
30 10 5 3 1 0 (-dB)
R