Surround Play; Surround Modes; Selecting The Listening Mode - Kenwood KSW-700 Instruction Manual

3.1ch speaker system
Table of Contents

Advertisement

Surround play

AX-7 is equipped with listening modes that allow you
to enjoy an enhanced sonic ambience with a variety
of video sources.
In order to obtain the optimum effect from the
surround modes, make sure to input the proper
speaker settings beforehand. (See page 11.)

Surround modes

Dolby Digital
The Dolby Digital surround format lets you enjoy up to 5.1
channels of digital surround sound from Dolby Digital program
sources (such as Laserdisc or DVD software marked
Compared with previous Dolby surround, Dolby Digital provides
even better sound quality, greater spatial accuracy, and
improved dynamic range.
Dolby Pro Logic II
Dolby Pro Logic II, whilst totally compatible with its predecessor
Pro Logic, provides greater advantages in surround sound.
Dolby Pro Logic II was designed specifically to provide a new
sense of spatiality, directionality and articulation of sounds from
Dolby Surround encoded sources (such as video and Laserdisc
software marked
an intelligent, built-in feedback logic design, a matrix surround
decoding and the decoding of stereo, full bandwidth surround
outputs.
The Pro Logic II modes programmed into this model are "Movie",
"Music", "Game" and "Pro Logic". Especiially in "Game" mode, base
sound not only from Front and Center but also from Surround
channel is added to Subwoofer. This provides even more
dynamic surround effects.
DTS
DTS has volume of data more than the Dolby Digital, and can
reproduce the surround of high sound quality or more. DVD
that adhere the
mark can be reproduced. They are the
same as the Dolby Digital 5.1 channels but it is a format that
lowered the audio compression rate when recording digitally
though. Because of that, high S/N with the thickness of the
sound can be reproduced. Moreover, an exact, magnificent
surround sound of wide a dynamic range and excelling in
Separation is a feature of DTS.
DTS has a ".1" or "LFE" channel. The indication "LFE" appears in the
surround indicator when a signal is being input for this channel.
(See page 14.)
).
). This is achieved with

Selecting the listening mode

C-AX7 (AX-7 system)
MULTI
CONTROL
1 Start playing the video software.
2 Select the "LISTEN MODE".
Main unit:
1 Press the [SOUND SELECTOR] key of
C-AX7, turn the [MULTI CONTROL] knob
to select "SURROUND". Then press the
[SET] key.
Switching as shown below is done each time the
knob is turned.
SURROUND
D-BASS
TONE
2 Turn the [MULTI CONTROL] knob to select
"LISTEN MODE". Then press the [SET] key.
Switching as shown below is done each time the
knob is turned.
V.F.S.
CLEAR VOICE
LISTEN MODE
Remote control unit:
Press the [LISTEN MODE] key.
Continued to next page
SOUND SELECTOR
MULTI
CONTROL
SET
LISTEN MODE
ENTER
13
EN

Advertisement

Table of Contents
loading

Table of Contents