Connecting To The Antennas - Kenwood AX-7 Instruction Manual

System connections

Connecting to the antennas

AM/FM radio stations cannot be received without the proper antenna connections. Connect the anten-
nas properly according to the following instructions.
FM outdoor antenna
Lead the 75Ω coaxial cable connected to the FM
outdoor antenna into the room and connect it to the
FM 75Ω terminal. Please remove the indoor antenna
after an outdoor antenna has been installed.
FM outdoor antenna
AM loop antenna
The supplied antenna is for indoor use. Place it as
far as possible from the main unit, TV set, speaker
cords and POWER cord, and set it to a direction
which provides the best reception.
How to connect the antenna
1
AM loop antenna
Assemble
Antenna adaptor
(Commercially
available parts)
10 EN
2
3
FM indoor antenna
The provided antenna is for temporary in-
door use only. For stable signal reception,
we recommend to use an outdoor antenna.
Remove the indoor antenna if you connect
to an outdoor antenna.
1
Connect the antenna to the antenna
terminal.
2
Locate the position providing good
reception condition.
3
Fix the antenna.
FM indoor antenna
C-AX7