Table of Contents
Advertisement
D-View 5.1 User's Guide
The statistics table lists the values of the device IF counters. Except for the Index
column, all columns in this table can be resized by dragging their respective right
borders with the mouse left button.
The following describes each column:
The Counters column displays the various IF statistics counters. For information
about these counters, see the discussion below.
The Total column displays the accumulated count since resetting the statistics
counters. These counters are reset whenever you restart the device, reset the port, or
click the Reset button.
The Rate/s column displays the total count per second.
The Avg Rate/s column displays the average count per second.
The Peak Rate/s column displays the peak count per second.
The Peak Occurred At column displays the date and time when the peak count
occurred.
The Poll Interval buttons set the polling time of the management console. Polling time
determines how often the management console polls the device for statistics. A polling
time of 5 seconds for example means that the management console polls the device
every five seconds to retrieve statistics values. These values are then processed and
displayed on the table. To increase the polling time, click the up-arrow button; to
decrease, click the down-arrow button.
The Reset button resets all IF statistics counters back to zero.
The Pause button pauses device polling.
The InOctets counter corresponds to the IfInOctets MIB object of the interface group.
This read-only object displays the total number of octets received on the interface. This
count includes framing characters.
The InUcastPkts counter corresponds to the IfInUcastPkts MIB object of the interface
group. This read-only object displays the number of subnetwork-unicast packets
delivered to a higher-level protocol.
The InNUcastPkts counter corresponds to the IfNUcastPkts MIB object of the interface
group. This readonly object displays the number of non-unicast packets delivered to a
higher-level protocol. Non-unicast packets include subnetwork-broadcast and
subnetwork-multicast packets.
The InDiscards counter corresponds to the IfInDiscards MIB object of the interface
group. This read-only object displays the number of inbound packets that were
121
Advertisement
Table of Contents
