Audio Adjust - Sharp 32SF56B Operation Manual

I dio se!ect (cOntinUed) " :: : i:: :: : :i
[] AUDIO ADJUST
When the "_" mark is at "AUDIO ADJUST", press VOL +/- to
access the AUDIO ADJUST screen To access the desired item,
press CH AIr. To adjust the audio setting, press VOL +/-.
[TREBLE]_SS ]__IBALANCEf=_ESET !
t_ tj
Selecteditem
TREBLE
BASS
BALANCE
VOL + button
To increasetrebleresponse
To increasebass response
To emphasizethe right
speaker'svolume
VOL - bu_on
Todecreasetrebferesponse
Todecreasebass response
Toemphasizethe left
speaker'svolume
RESET To returnall adjustmentsto factorypreset levels
TREBLE 0
MENU
6 Press MENU to exit, 0
An example screen displaying ON AiR Analog Channel when receiving stereo broadcasts
Current channel number
"e- ON AIR" will appear next to STEREO or
SAP when receiving STEREO or SAP
broadcasts
12
OSTEREO e_
SAP _ON AIR
_,_ONO
(Analog CHANNEL callon screen'
o Once MONO mode is selected, the TV sound remains monaural even if the TV set receives a stereo
broadcast You must switch the mode back to STEREO if you want to hear stereo sound again,
o Selecting MTS while receiving video signals from INPUT terminals does not change the type of
sound; in this case, sound is determined by the video source.,
• If"FAO" mode is on, "SPEAKER" mode wil! automatically turn off Changing "SPEAKER" setting will
not affect "FAO" mode.
17