Installing Scansnap; Before Installing The Supplied Programs - Fujitsu PA03541-B105 Operator's Manual

2.1

Installing ScanSnap

"Installation" is the operation to copy the supplied program file or ScanSnap Manager to the hard
disk of your computer and create the environment for using the ScanSnap on the computer.

■ Before installing the supplied programs

1. Before installing the supplied programs, check the following system requirements.
■ Operating system
One of the following operating systems is required:
•
Mac OS X v10.2.8, v10.3, v10.4 or v10.5
ScanSnap Manager
Cardiris
(
*1 When the operating system you are using is Mac OS X v10.2.8.
*2 When the operating system you are using is Mac OS X v10.3.9.
■ Computer
•
PowerPC
(recommended: Intel
•
USB port (USB 2.0/1.1)
■ RAM
•
128MB or more
(recommended: 512MB or more, or 1GB or more for Mac OS X v10.5)
ATTENTION
6
Mac OS X
v10.1
: Supported -: Not-supported)
®
G4 processor 800MHz or higher, Intel
®
Core
•
We recommend applying the latest updates to the Mac OS X for better
reliability.
•
The ScanSnap may not function if it is connected to a USB port for the
keyboard or the monitor.
•
If you need to use a commercially available USB hub, use a powered one
that comes with an AC adapter.
•
If you want to connect the ScanSnap via USB 2.0, the USB port and Hub
must be USB 2.0-compliant. The scanning speed may slow down when
the ScanSnap is connected using USB 1.1. Use the USB 2.0 port, if your
computer has one.
•
If the CPU or the memory does not meet the requirements, the scanning
speed will slow down.
Mac OS X
Mac OS X
*1
v10.2
-
- -
™
Duo Processor 1.83GHz or higher)
Mac OS X Mac OS X
v10.3 v10.4
*2
® ™
Core Solo or Duo Processor
v10.5