Turning On The Power; Turning Off The Power - Hitachi CP-S335 Quick Start Manual

Operating Operating
WARNING ►When the power is on, a strong light is emitted. Do not look
into the lens or vents of the projector.

Turning on the power

1. Set the power switch to the ON position.
2. Press the STANDBY/ON (projector or
remote control) button.
Displaying
1. To select an input signal, use the button of INPUT (projector), or the buttons
of RGB, VIDEO or SEARCH (remote control).
2.
To change the aspect ratio, use the button
ASPECT (remote control).
3. To adjust the zoom and focus, use the
zoom knob and the focus ring.
LAMP
indicator
LAMP
TEMP
TEMP
indicator
POWER
POWER
STANDBY/ON
indicator
MENU
STANDBY/ON
button

Turning off the power

1. Press the STANDBY/ON (projector or remote control) button.
The message "Power off?" will appear on the screen for approximately 5 seconds.
2. Press the STANDBY/ON (projector or remote control) button again while the
message is visible.
The projector lamp will go off, and the POWER
indicator will begin blinking orange. Then the
POWER indicator will stop blinking and light to
solid orange when the lamp cooling is complete.
3. Make sure that the power indicator lights to solid
orange, set the power switch to the OFF position.
The POWER indicator will go off.
MENU
button
ASPECT button
Cursor
buttons
INPUT
INPUT
button
ESC (Escape) button
Power switch
POWER
(Solid orange)
POWER
(Blinking green)
Zoom knob
Focus ring
RGB
VIDEO button
button
STANDBY/ON
SEARCH
VIDEO RGB
HOME button
ASPECT AUTO
MAGNIFY
PAGE UP
MAGNIFY HOME
ON button
ON
OFF button END PAGE DOWN
OFF
FREEZE KEYSTONE
END button
FREEZE button
POSITION
POSITION button
ENTER
Cursor buttons
ESC
ENTER
button
POWER
POWER
(Solid orange)
Operating
POWER
(Solid green)
SEARCH button
STANDBY/ON
button
AUTO button
BLANK
BLANK button
VOLUME
VOLUME button
MUTE
PAGE UP button
MUTE button
MENU
KEYSTONE
button
RESET
PAGE DOWN
button
MENU button
RESET button
(Blinking orange)
7