Watching An Image From A Personal Computer; Connecting A Personal Computer; Displaying An Image From A Personal Computer - Pioneer PDP-4340HD Operating Instructions Manual

Enjoying through External Equipment
Watching an image from a personal
computer

Connecting a personal computer

Use the PC terminals to connect a personal computer.
Media Receiver (front view)
Displaying an image from a personal com-
puter
When connecting to a personal computer, the input
signal type is automatically identified. If the personal
computer image does not come in clearly, you may
need to use Auto Setup in the menu. See page 81.
To watch an image coming from the personal com-
puter, press PC on the remote control unit or press
INPUT on the Plasma Display to select "PC".
• The PC terminals cannot be used for audiovisual
equipment.
PDP5040HD-Eng (65-80)
ø 3.5 mm stereo mini-plug cable
(commercially available)
Personal computer
77
• The PC input terminals are DDC1/2B-compatible.
• Refer to page 107 for a list of personal computer
signals compatible with the Plasma Display System.
RGB cable
(commercially available)
Signal names for 15-pin mini D-sub connecter
5 4 3
10 9 8
15 14 13
(front view)
Pin No. Signal name
1
R
2
G
3
B
4
Not connected
5
Not connected
6
GND (ground)
7
GND (ground)
8
GND (ground)
9
+5V
0
GND (ground)
-
Not connected
=
SDA
~
HD
!
VD
@
SCL
• A Macintosh adaptor may be required for use with
some Macintosh computers.
7/24/03, 2:00 PM
2 1
7 6
12 11
11
77
En