NETGEAR WNR1000v2 - Wireless- N Router User Manual page 42

Wireless-N 150 Router WNR1000v2 User Manual
2. On the wireless client, follow its specific networking instructions to enable WPS, to allow it to
connect to the router.
The WNR1000v2 router's green
conditions occurs:
• The router and the client establish a wireless connection.
• The 2-minute window period expires for establishing a WPS connection. If the connection
is not established, no WPS security settings will be specified in the WNR1000v2 router.
Using the Software Button in the Add WPS Client Screen
1. Log in to the router as described in
2. Select Add WPS Client in the main menu, and click Next.
3. Select the Push Button setup method.
Figure 2-6
4. Click the button in the Add WPS Client screen. The Connecting to New Wireless Client
screen displays.
Figure 2-7
2-14
light ceases blinking and remains on when one of these
"Logging In To Your Wireless Router" on page
v1.0, September 2009
1-2.
Safeguarding Your Network