Connecting To A Network Router; Wired Network; Wireless Network - Samsung HT-ES8200 User Manual

Connections

Connecting to a Network Router

You can connect your product to your network
router using one of the methods illustrated below.

Wired Network

Broadband modem
(with integrated router)
Or
Router
Broadband
| NOTE |
\ Internet access to Samsung's Software Update server
may not be allowed, depending on the router you use or
your ISP's policy. For more information, contact your ISP
(Internet Service Provider).
\ DSL users, please use a router to make a network
connection.
\ To use the AllShare Play function, you must connect your
PC to your network as shown in the illustrations on the
left.
The connection can be wired or wireless.
24
|
English

Wireless Network

Broadband
service
| NOTE
\ If your wireless IP router supports DHCP, this product can
\ Set your wireless IP router to Infrastructure mode. Ad-hoc
Broadband
service
\ The product supports only the following wireless security
modem
\ Select a channel on the wireless IP router that is not
\ If you select the Pure High-throughput (Greenfield)
\ Wireless LAN, by its nature, may cause interference,
Wireless IP sharer
|
use a DHCP or static IP address to connect to the wireless
network.
mode is not supported.
key protocols:
- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK
(TKIP/AES)
currently being used. If the channel set for the wireless IP
router is currently being used by another device nearby, it
will result in interference and communication failure.
802.11n mode and set the Encryption type on your router
or AP to WEP, TKIP or TKIP-AES (WPS2Mixed), the product
will not support a connection in compliance with new Wi-
Fi certification specifications.
depending on the operating conditions (AP performance,
distance, obstacles, interference by other radio devices,
etc).
Broadband
service