Turning On The Power - Canon EOS M EF-M 22mm STM Kit Instruction Manual

Turning on the Power

If you set the power to <1> and the time zone/date/time setting
screen appears, see page 27 to set the time zone and date/time.
3 Power-saving Features
To save power, the LCD monitor turns off automatically if you do not
operate the camera. If you continue to not operate the camera, the power
will turn off automatically. While the LCD monitor is off, pressing any
camera button or tapping the LCD monitor will turn it on again. If the power
turned off, either press the power button or press the <x> for at least
approx. 2 sec. to turn on the power again.
You can change the LCD monitor auto off time and Camera auto off time
with [LCD auto off] and [Camera auto off] under [52: Power saving]
(9?).
If you set the power to <2> while an image is being recorded to the card,
[Recording...] will be displayed and the power will turn off after the card finishes
recording the image.
Pressing the power button toggles between
<1> and <2>.
With the power <2>, holding down the
<x> button for 2 sec. or longer will start the
playback mode.
When an EF-M lens is attached to the
camera and the power is off, the aperture
stops down to shut out the light and
protect the inside of the camera. When
you set the power to <1> or <2>,
the aperture makes a small noise as it
opens.
25