Chapter 1
Basic System Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
modem in
To enable the modem connection on the console port, use the modem in command. To disable the
modem connection, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default
Timeout is disabled.
Command Modes
Terminal line configuration
Command History
Release
4.0(0)N1(1a)
Usage Guidelines
You can configure the console port only from a session on the console port.
Examples
This example shows how to enable a modem connection on the console port:
switch# configure terminal
switch(config)# line console
switch(config-console)# modem in
This example shows how to disable a modem connection on the console port:
switch# configure terminal
switch(config)# line console
switch(config-console)# no modem in
Related Commands
Command
line console
show line
OL-16599-01
modem in
no modem in
Modification
This command was introduced.
Description
Enters console port configuration mode.
Displays information about the console port configuration.
Cisco Nexus 5000 Series Command Reference
modem in
1-55