Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual page 80

Note:
See the EPSON Net!2 setup procedures for Windows for
additional cautions and notes.
There are some restrictions on the characters you can use
depending on your browser. For details, see your browser or OS
documentation.
1. Run EPSON Net!2. Select the printer you want to configure from
the list, and click the Launch Browser button. EPSON Net!2
closes automatically.
Or, start your browser and type the IP address of the Ethernet
card, as shown below. Make sure EPSON Net!2 for Windows is
closed before launching your browser.
http://(the IP address of the Ethernet card)/
The card's home page appears.
Click NetWare under Network on the Configuration menu to
2.
view the NetWare settings screen.
3. Make basic settings for NetWare.
You can select either Enable or Disable in the NetWare text box.
Choose Enable to use NetWare.
Note:
If Disable is on, all NetWare related functions stop. When this occurs,
you can't configure the Ethernet card for NetWare using EPSON Net!2
for Windows.
4. Select the Primary Frame Type.
5. Select the Mode.
Select NDS Print Server or NDS Remote Printer when you
are using NDS mode in NetWare 4.1x.
4-36 Using the Ethernet Card with NetWare