Panasonic SC-BT100P-K Operating Instructions Manual page 41

Card
The capacity of the SD card
decreased.
MPEG-2 motion pictures and
music on an SD card cannot be
played.
The contents of the card
cannot be read.
iPod operation
Cannot charge or operate.
Cannot display iPod videos/
photos on the TV.
Radio
Distorted sound or noise is
heard. "ST" flickers or does not
light.
A beat sound is heard.
A low hum is heard during AM
broadcasts.
Wireless system
No sound.
The indicator on the wireless
system keeps flashing between
red and green.
Other difficulties with playback
Audio and video momentarily
pause.
BD-Video or DVD-Video is not
played.
Picture-in-picture is not played
with BD-Video.
The virtual package is not
played with BD-Video.
Alternative soundtrack and
subtitles cannot be selected.
No subtitles.
The subtitles overlap closed
captions recorded on discs.
Angle cannot be changed.
The resume play function does
not work.
≥When a BD-Video that supports the virtual package is used, and an SD card is in the slot,
data may be written to the SD card. Erase the data by using "BD-Video Data Erase", format
the card or use a new card.
≥Data that can be played from an SD card are AVCHD and JPEG data.
≥The card is not compatible or the contents on the card may be damaged.
≥Turn off and then turn on the unit again.
≥Check that the iPod is connected firmly.
≥The battery of the iPod is depleted. Charge the iPod, and then operate again.
≥Make sure that TV is connected to the VIDEO OUT terminal on this unit.
≥Operate the iPod menu to make the appropriate video/photo output settings for your TV.
(Refer to operating instructions for your iPod.)
≥Adjust the position of the FM or AM antenna.
≥Use an outdoor antenna.
≥Turn the TV off or move it away from the unit.
≥Separate the antenna from other cables.
≥Ensure that the digital transmitter is fully inserted into the slot of the main unit.
≥Ensure that the wireless system is plugged into the house hold AC outlet and is turned on.
Then, check that "[W2S]" or "[W4S]" is displayed on the main unit's display.
≥Ensure that surround selector at the rear of the wireless system is set to the center position.
≥Perform the steps bellow.
1 While pressing the [9/5] on the main unit, press the numbered button [3] on the
remote control until "P" lights in the main unit's display.
≥The indicator on the wireless system turns green.
2 While "P" is displayed, press [I/D SET] on the rear of the
wireless system.
≥If "P" goes off before you press [I/D SET], repeat step 1
and then continue the procedure.
3 While pressing [9/5] on the main unit, press the
numbered button [3] on the remote control.
≥"[W2S]" or "[W4S]" lights on the main unit.
4 Turn off and on the wireless system.
≥Make sure the indicator on the wireless system lights up green.
≥There is a power supply problem. Consult the dealer.
≥This occurs between playlist chapters or scenes ([AVCHD]).
≥When playing a title recorded on both layers, the unit automatically switches between layers
and plays the title in the same way as a normal program. However, video and audio may
momentarily cut out when the unit is switching layers.
≥Ensure the disc is for the correct BD-Video region code or DVD-Video region number, and is
not defective.
≥You have set a ratings level to limit BD-Video or DVD-Video play. Change this setting.
≥Some BD-Video can only be output with HDMI.
≥Confirm whether the disc supports picture-in-picture.
≥Confirm whether the disc supports the virtual package.
≥The inserted SD card does not have sufficient available capacity.
≥The SD card is write-protected.
≥Sub contents copied to an SD card are provided by the disc producer as a part of the
BD-Video content. Even if you record images and audio onto an SD card, it cannot be played
as a virtual package.
≥The languages are not recorded on the disc.
≥You may not be able to use the on-screen menu to change the soundtrack and subtitles on
some discs. Use the disc's menus to make changes.
≥Subtitles are not recorded on the disc.
≥Turn the subtitles on. Set "Subtitle" on the on-screen menu to "On".
≥When progressive output is on, closed captions cannot be displayed.
≥Turn off the subtitles or turn off the closed caption setting on the TV.
≥Angles can only be changed during scenes where different angles are recorded.
≥Memorized positions are canceled when
– pressing [∫] several times.
– opening the disc tray.
≥The resume play function may not work depending on the disc.
Page
I/D SET
Use a pointed
object.
24
12
12
—
20
—
7
—
—
36
—
—
6
8, 9
6
—
—
—
—
Cover
32
—
—
24
—
12
24
—
14, 24
—
30
—
30
—
—
—
RQT9129
41