BEFORE USING THE MACHINE
This section provides basic information about the machine. Please read this chapter before using the machine.
PART NAMES AND FUNCTIONS
EXTERIOR
(1)-a
(1)-a Document cover*
Place an original on the document glass and close the
document cover before copying starts.
(1)-b Automatic document feeder*
This automatically feeds and scans multiple originals. Both
sides of 2-sided originals can be automatically scanned.
☞
PLACING THE ORIGINAL
(2)
Front cover
Open this cover to switch the main power switch to "On"
or "Off" or to replace a toner cartridge.
☞
TURNING THE POWER ON AND OFF
☞
REPLACING THE TONER CARTRIDGES
1-61)
(3)
Output tray (center tray)
Output is delivered to this tray.
* Peripheral device.
(1)-b
(2) (3)
(page 1-35)
(page 1-15)
(page
1-3
BEFORE USING THE MACHINE
(4)
(5)
When a finisher is installed
(4)
Operation panel
This is used to select functions and enter the number of
copies.
☞
OPERATION PANEL
(5)
Exit tray unit (right tray)
When installed, output can be delivered to this tray.
(6)
Finisher*
This can be used to staple output. A punch module can
also be installed to punch holes in output.
☞
FINISHER
(page 1-41)
(6)
(page 1-8)
*
Contents