Bluetooth Settings; Activating Bluetooth - Samsung SGH-T679 Galaxy Exhibit 4G User Manual

3. Tap Network notification again to remove
the check mark and deactivate this
feature.
WPS Button Connection
The WPS (Wi-Fi Protected Setup) button is a
standard for easy and secure wireless network
set up and connections. To use WPS, the
connecting device must support WPS and be
compatible with Wi-Fi Protected Access (WPA)
security. WPS can automatically set up a random
network name and WPA wireless security for
wireless Wi-Fi phones, routers, access points,
computers, adapters, and other electronic
devices.
WPS allows you to push buttons instead of
entering a network name and wireless security
PIN.
1. Press
(Settings) Wireless and network
settings.
2. Tap WPS button connection.
3. Press the WPS button on your Wi-Fi access
point within 2 minutes.
Manually Adding a Wi-Fi Network
1. Press
(Settings) Wireless and network
settings.
2. Tap Wi-Fi to turn it on.
184
and then tap
Wi-Fi
and then tap
Wi-Fi
3. Tap Add Wi-Fi network.
4. Enter the SSID (Service Set Identifier) and
Security settings then tap Save.
Note: An SSID is a unique key which identifies a
wireless LAN. Its purpose is to stop other
wireless equipment from accessing your
LAN — whether accidentally or
intentionally. To communicate, wireless
devices must be configured with the same
SSID.

Bluetooth settings

In this menu you can activate Bluetooth, view or
assign a device name, activate your phone so
other Bluetooth devices can discover it, or scan
for other, available Bluetooth devices with which
to pair.

Activating Bluetooth

Press
(Settings) Wireless and network
Bluetooth settings and tap Bluetooth to turn
it on.
Note: Bluetooth must be enabled prior to use.
and then tap