Use Voice Activation - Philips DVT7000/00 User Manual

5.2.2 Use voice activation
When voice-activated recording is enabled, recording will start
when you begin speaking. When you stop speaking, the device will
automatically pause recording after three seconds of silence, and
resume only when you begin speaking again.
Use the voice activation level to set the volume at which the device
should begin recording.
1
Customize the voice-activated recording settings in the Settings
menu and turn on the feature
disable voice-activated recording, page
If this feature is on, the ‚ icon is displayed.
X
2
Press the g key.
X The devices switches to standby mode. The (|) icon will be
displayed. Recording will start when you begin speaking. When you
stop speaking, the device will automatically pause recording after
three seconds of silence.
3
Press the j key to stop recording.
The device returns to stop mode.
X
Tip
• Press + / – during recording to adjust the voice activation level.
30
Record
(see also chapter 9.1.11 Enable/
45).
Table of contents