Table of Contents
Advertisement
3
Press TUNING 4 ¢ (on the remote
control 4 ¢) to select a desired track.
➜
The album number will change accordingly as
you reach the first track of an album by pressing
4 or the last track of an album by pressing
¢.
4
Press 2; to start playback.
●
During playback, press DISPLAY/CLOCK to
display the ID3 information if available.
Supported MP3 disc formats:
– ISO9660, Joliet, UDF 1.5
– Maximum title number: 256 (depending on
filename length)
– Maximum album number: 32
– Supported sampling frequencies: 32 kHz, 44.1
kHz, 48 kHz
– Supported Bit-rates: 32~256 (kbps), variable
bitrates
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback. The play
modes can also be combined with
PROGRAMME.
SHUF ................ tracks of the entire disc are
played in random order
REP ALL ........... repeats the entire disc/
programme
REP ................... plays the current track
continuously
REP ALB ........... repeats all tracks in the current
(for MP3 only) album
1
To select your play mode, press the REPEAT/
SHUFFLE button before or during playback
until the display shows the desired function.
2
Press 2; to start playback if in the STOP
position.
➜
If you have selected SHUFFLE, playback starts
automatically.
3
To return to normal playback, press the
REPEAT/SHUFFLE button until the various
SHUFFLE/ REPEAT modes are no longer
displayed.
●
You can also press 9 to cancel your play mode.
CD/MP3 Operation
Note:
– The SHUFFLE and REPEAT functions cannot be
used simultaneously.
Programming track numbers
Programme in the STOP position to select and
store your disc tracks in the desired sequence. If
you like, store any track more than once. Up to
40 tracks can be stored in the memory.
1
In the stop position, use the TUNING 4
¢ (on the remote control 4 ¢) to
select your desired track number.
●
For MP3/WMA, you may press ALBUM/
PRESET 4 3 to select a desired album, then
press ¡1 2™ to select your desired track.
2
Press PROGRAM to store.
➜
flashes, and PR 01 is displayed
Display:
PROG
briefly, then the selected track number (and the
selected album number for MP3/WMA).
3
Repeat steps 1-2 to select and store all desired
tracks.
➜
FULL is displayed if you attempt to
programme more than 40 tracks.
4
To start playback of your disc programme, press
2;.
Reviewing the programme
●
Stop playback and press PROGRAM
repeatedly.
●
To exit review mode, pressÇ.
Erasing the programme
You can erase the programme by:
●
pressing 9 once in the STOP mode;
●
pressing 9 twice during playback;
●
opening the CD compartment;
➜
disappears from the display.
PROG
17
Advertisement
Table of Contents
