Canon SELPHY CP900 User Manual page 45

2
Commercially available USB cable
3
4
5
Macintosh
Install the software as described in Step 1 on
O
Connect SELPHY to the computer as described in above Steps 2 to 3 and turn SELPHY on.
O
Select [ ] from the menu, and click [System Preferences] r [Print & Fax] to open the [Print & Fax]
O
screen. Click [+] to select [CP900] from the pop-up window, then click [Add].
Print as described in Steps 2 to 7 on
O
SELPHY may not operate correctly if it is connected to a computer via a USB hub.
O
SELPHY may not function properly if other USB devices (with the exception of a USB mouse
O
or USB keyboard) are used at the same time. Disconnect any other USB devices from your
computer and then reconnect SELPHY.
Do not put your computer into standby mode (or sleep mode) while SELPHY is connected to the
O
computer's USB port. If you accidentally do so, awaken the computer from standby mode without
disconnecting the USB cable. Restart the computer if the computer does not recover properly.
For details on handling the computer, refer to the user guide included with your computer.
O
You can start the software automatically when SELPHY and the computer are connected by a USB cable by
O
setting [Start SELPHY Photo Print automatically] to [On] in the screen displayed by clicking [Setting] in Step 3
described on p. 39
Prepare SELPHY and connect to a computer.
O
O
O
O
Turn on SELPHY.
O
Finish installation.
O
Print.
O
p.
p. 39.
.
Turn off SELPHY and remove the memory card or USB
flash memory.
Insert an ink cassette and a paper cassette that contain
paper you want to use into SELPHY
Use the USB cable to connect SELPHY to the computer.
Refer to the user guides included with the cable and
computer for handling instructions.
Press the q button to turn on SELPHY.
When the installation finishes, click [Restart] to restart
the computer and complete the installation.
Print as described in Steps 2 to 7 on
38.
(pp. 7 – 10).
p. 39.
45