Rear Panel - Asus DSL-N10 User Manual

Rear panel

Label
Reset
Power
On/Off
LAN1-LAN4
WPS
Wireless On/Off
ADSL
8
DSL-N10
ANT Reset Power
On/ Off LAN4 LAN3 LAN2
Press this button for more than five seconds to reset the
system to its factory default settings. If this function failed,
refer to section Firmware Restoration on page 9 for
details on how to restore your router to default settings.
Insert the AC adapter into this port to connect your router
to a power source.
Press this button to turn the power on/off.
Connect RJ-5 Ethernet cables to these ports to establish
LAN connection.
Press this button to launch WPS function.
Press this button to enable or disable wireless function.
Connect to a splitter or to a telephone outlet via an RJ-11
cable.
Wireless
LAN1 WPS On/Off ADSL
Description
Chapter 1: Knowing your wireless router