Checking The Drives For Data Consistency - Asus RS720Q-E7/RS12 User Manual

6.2.5

Checking the drives for data consistency

You can check and verify the accuracy of data redundancy in the selected virtual drive.
The utility can automatically detect and/or detect and correct any differences in data
redundancy depending on the selected option in the Objects > Adapter menu.
The Check Consistency command is available only for virtual drives included in
a RAID 1 or RAID 10 set.
Using the Check Consistency Command
To check data consistency using the Check Consistency command
From the Management Menu, select Check Consistency, and then press
1.
<Enter>.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
2. The screen displays the available RAID set(s) and prompts you to select the
virtual drive to check. Press <Space> to select the virtual drive from the Virtual
Drive sub-menu, and then press <F10>.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Virtual Drives
Virtual Drive 0
6-18
LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010
BIOS Version
LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010
BIOS Version
LD RAID
0 1
SPACE-(De)Select,
A.10.09231523R
CC Of VD(s)
A.10.09231523R
Virtual Drive(s) Configured
Size #Stripes
148.580GB 2
Select VD
F10-Check Consistency
StripSz Status
64 KB ONLINE
Chapter 6: RAID configuration