Explaining Battery Terms; Using The Rechargeable Li-Ion Battery (Optional); Installing The Rechargeable Li-Ion Battery - Brother PocketJet PJ-622 User Manual

Pocketjet mobile printer
Hide thumbs Also See for PocketJet PJ-622:
Table of Contents

Advertisement

Explaining Battery Terms

Discharge
Discharge occurs when the rechargeable
Ni-MH battery's power is depleted. The
battery discharges slowly over time, even
when the battery is not in use. When the
battery has been fully-discharged, it
cannot be used until it is recharged.
Refresh
Refresh occurs when the printer fully
discharges the rechargeable Ni-MH
battery so that the battery can be
recharged to its full capacity. To refresh
the battery, press and hold the
(Power) button for a few seconds until
the POWER indicator begins to blink in
green and orange (see Refresh Ni-MH
Battery on page 32 for more options).
Over-discharge
Over-discharge occurs when the
rechargeable Ni-MH battery's power has
been depleted to the point that even when
charged, it will not retain as much power
as before. To avoid over-discharging the
battery, charge it periodically.
Inactivity
Inactivity is the condition when the
rechargeable Ni-MH battery has been
unused for too long, and it cannot retain as
much power as before. The battery can be
restored to its earlier capacity by
refreshing it one or two times. If more than
one year has passed since the battery
was last use, it will not return to its earlier
capacity.
Trickle charge
Trickle charge is the small amount of
power used to charge the rechargeable
Ni-MH battery whenever the printer is
connected to AC or DC power. The battery
slowly discharges (loses power) over time,
even when not in use. Trickle charging
offsets this discharge, so that the battery
remains charged.
Using the
1
Rechargeable Li-ion
Battery (Optional)
Installing the Rechargeable
Li-ion Battery
a
Open the battery cover by pressing the
cover latch.
1 Battery cover
2 Cover latch
b
Swing the cover open and remove it.
c
Move the slide switches on the
rechargeable Li-ion battery inward, and
then insert the battery into the battery
compartment.
3 Slide switches
Setting Up the Printer
1
2
3
1
1
1
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents