Page 2
HotSync logo and Palm are the permission of the copyright holder. trademarks of Palm, Inc. or its subsidiaries. • In no event will SONY be liable for any Adobe and Adobe Acrobat Reader are financial damage or loss of profits, trademarks of Adobe Systems Incorporated.
Table of contents What you can do with the CLIÉ Remote Commander ......4 Installing ..........5 Preparing the CLIÉ Remote Commander for your use ..... 6 Assigning devices to the CLIÉ Remote Commander ........... 6 Assigning operations to the application buttons and Jog Dial navigator ....
What you can do with the CLIÉ Remote Commander The CLIÉ Remote Commander is an application you can install on your CLIÉ handheld to enable the CLIÉ handheld to function as a remote commander. A single remote control for multiple devices You can control a variety of remote-controlled devices (e.g.
Make sure that the Add-on folder is selected. If the Add-on folder is not selected, select it manually. At the default setup, the Add-on folder is stored in the Sony Handheld folder of the Program Files folder. Double-click the RMC folder.
Preparing the CLIÉ Remote Commander for your use Assigning devices to the CLIÉ Remote Commander Note To check whether the manufacturer of your remote-controlled device is supported by the CLIÉ Remote Commander application, refer to the “Appendix” on page 14. ™...
Page 7
Preparing the CLIÉ Remote Commander for your use Tap the arrow V next to the following items and select the appropriate settings for your device(s). • Category: Select the device you want to remote-control. Select from TV, VCR, DVD, AV-AMP (amplifier). •...
Page 8
Preparing the CLIÉ Remote Commander for your use Changing the remote control setting Tap Menu on the control screen of the device of which you want to change the remote control settings. Tap Detail from the Options menu. The Detail screen appears. Make changes as necessary and tap OK.
Preparing the CLIÉ Remote Commander for your use Assigning operations to the application buttons and Jog Dial navigator ™ You can assign operations to the Jog Dial navigator or to the application buttons on the front panel. This is convenient for those operations you perform most (e.g.
Page 10
Preparing the CLIÉ Remote Commander for your use Tap the box next to each assignable button (e.g. JOG Up). The Key Assignment dialog box for each button appears. Tap the arrow V next to Entry, and select the name of the remote control setting you wish to assign to the key.
Using the CLIÉ handheld as a remote commander You can operate a remote-controlled device on the device’s control screen. ™ For those operations you have assigned to the Jog Dial navigator or to the application buttons, see page 9. Notes •...
Using the CLIÉ handheld as a remote commander Operating devices directly with the Jog Dial navigator or the application button Follow the steps below to perform the assigned operation from the Jog Dial navigator or the application buttons. Start CLIÉ Remote Commander. Use the Jog Dial navigator or the application buttons to remote-control the device.
CLIÉ Remote Commander menu items The following items appear when you tap the MENU icon. This section describes the menu commands specific to the CLIÉ Remote Commander application. For the Edit menu, see “Using the edit menu” in the Operating Instructions manual. Options menu Detail Shows the remote control setting for the displayed control screen.