Table of Contents
Advertisement
Turning on the Appliance
Starting a wash cycle...
Make sure that the plug for the appliance is inserted into the wall socket.
Make sure that the water supply is turned on to full pressure.
Load the dishwasher.
Pour in the detergent.
Turn the knob located on the right of the control panel in the clockwise direction until the number or
symbol for the cycle section entitled.
Press the ON-OFF button, and the ON-OFF light will turn on. At this point, the wash cycle will begin.
Notice:
When washing, the knob will not rotate itself.
At the end of the wash cycle...
When the knob stops turning and is aligned with a STOP mark (see figure), the cycle has finished. Turn
off the appliance using the ON-OFF button, turn off the water supply and open the door of the dishwasher.
Wait a few minutes before unloading the dishwasher to avoid handling the dishes and utensils while they
are still hot and more susceptible to breakage. They will also dry better.
Cancelling or modifying a wash cycle setting...
Press the ON-OFF button and the ON Light will turn off. Rotate the knob in the clockwise direction to the
desired cycle setting. Then, turn the dishwasher back on using the ON-OFF button.
16
en
Advertisement
Table of Contents
