Step 6: Install Drain Hose To Drain Loop; Step 7: Position Water Line And House Wiring; Step 8: Install Drain Hose, Through Cabinet - GE GDF510PSDSS Installation Instructions Manual

Dishwasher Installation
STEP 5: INSTALL 90° ELBOW
• Wrap a 90° elbow with
thread seal tape.
• Thread 90° elbow
onto the water valve.
• Do not overtighten
elbow. Water valve
bracket could
bend or water valve
fitting could break.
Thread
• Position the end of
Seal
the elbow to face the Tape
rear of the dishwasher.
STEP 6: INSTALL DRAIN HOSE TO DRAIN
LOOP
Connect drain loop end to drain hose using the screw clamp as
shown in the figure.
Figure L
Front of Dishwasher
Water Valve
Bracket
90° Elbow
Fill Hose
Figure K
STEP 7: POSITION WATER LINE
AND HOUSE WIRING
• Position water supply line and house wiring on the floor of the
opening to avoid interference with base of dishwasher and
components under dishwasher.
4"
6"
Water
Line
Figure M
STEP 8: INSTALL DRAIN HOSE,
THROUGH CABINET
• Position dishwasher in front of cabinet opening. Insert drain
hose into the hole in cabinet side. If a power cord is used,
guide the end through a separate hole.
Insulation
Blanket
Figure N
Tip: Prevent unnecessary service call charges for fill, drain or
noise concerns.
Position utility lines so they do not interfere with anything
under or behind the dishwasher.
4"
6"
House
Wiring
Maximum Drain Hose
Length 10'
Water
Line
Drain
Hose
House
Wiring
Power Cord
(If Used)
7