Wan Interfaces - Cisco Small Business WRP400 User Manual

Installing and Configuring Your Mobile Network
Setup > Connection Recovery
Cisco WRP400 User Guide

WAN Interfaces

The Summary table includes one row of information for the Ethernet interface and
one row of information for the USB interface.
• Status: The link status of this interface:
- Disconnected: The device is plugged in and available but not active.
- Connecting: The WRP400 is attempting to bring up the link over the
device.
- Connected: The link is up and running on the device.
- Wait Recovery: When the WRP400 is connected to the Ethernet, this
status means that the Ethernet is waiting recovered to route to the
Failover Validation Site.
You can click the Status hyperlink to view the Status page for the
NOTE
interface. To return to the Connection Recovery screen, click the Back
button on the browser toolbar. For more information,
Information," on page 102
page 104
• Priority: The priority setting determines which interface is used when both
interfaces are available. By default, the Ethernet interface has top priority.
However, you can change the priority setting by clicking Up to move an
interface to the top priority level or by clicking Down to move an interface to
the low priority level.
The interface priority setting is configurable only when Ethernet
NOTE
Connection Recovery is disabled.
and
.
see"Router
"Mobile Network Status," on
5
48